Success cases

On the use of zeolite-based filter media

Get a quote

Surface water pre-filtration for reverse osmosis for thermoelectric plant

Comparative estimates for a feed flow of 140 m³/hour and three tanks operating plus one in standby with surface water. With a feed NTU of 15 - 23 NTU.

cfe-data.jpg

Tampico water treatment plant case study

tampico-data.jpg

"Guaymas - Empalme " Desalination plant

guaymas-empalme-data.jpg

"La Paz" Purification plant

The treatment is designed to remove iron and manganese in addition to suspended solids and consists of the following stages.

  • Chemical oxidation
    • A dose of sodium hypochlorite is added in a reaction tank until a residual of 1 ppm is reached.
  • Primary filtration
    • Water is filtered by Zeomedia 12-20 to remove total suspended solids down to 5 microns.
  • Secondary Filtration
    • The influent is filtered by Zeomedia 14-40 where the manganese and iron precipitate and adhere to the surface area of the zeolite, forming a film of manganese and iron oxide. The film allows the retention of dissolved iron and manganese particles.
  • Desalination by reverse osmosis
    • The water is then filtered through a reverse osmosis system to remove the remaining dissolved salts.

Substitution of 12-40 sand for silica in filtration train for RO in steel plant

Comparative results for a feed flow of 280 m³/hour. With treated wastewater feed.

steel-data.jpg

Abu Dhabi Project

Comparative results for a feed flow of 280 m³/hour. With treated wastewater feed.

abu-dhabi.jpg

Optimize the efficiency of your filtration system today.

Get a quote
Zeomedia
Powered by  GDPR Cookie Compliance
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.